បណ្ឌិត យិន ហ័រ

• គោត្តនាម-នាម (Name):  បណ្ឌិត យិន ហ័រ  /   Dr. YIN HOR      
• តួនាទី (Position): Vice Dean, Graduate School, NPIC
• ឯកទេស (Field): Architectural and Structural Design
• លេខទូរស័ព្ទ (Phone No.): 012/098-429 297
• អ៊ីម៉ែល (E-mail): yin_hor@yahoo.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Structural RC Design
  • Rehabilitation and Strengthening RC Structures
  • Finite Element Modelling
  • Nonlinear Structural Analysis
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  • International peer-reviewed journals

1. Wee Teo, Hor Yin, “Suitability of optimized truss model to predict the FRP contribution to shear resistance for externally bonded FRP strengthened RC beams without internal shear reinforcement,” Composite Part B, 80, 385–398, 2015. https://doi.org/10.1016/j.compositesb.2015.05.004

2. Hor Yin, Wee Teo, Kazutaka Shirai, “Experimental investigation on the behaviour of reinforced concrete slabs strengthened with ultra-high performance concrete,” Construction and Building Materials, 155, 463–474, 2017. https://doi.org/10.1016/j.conbuildmat.2017.08.077

3. Hor Yin, Kazutaka Shirai, Wee Teo, “Prediction of shear capacity of UHPC–concrete composite structural members based on existing codes,” Journal of Civil Engineering and Management, 24(8), 607–618, 2018. https://doi.org/10.3846/jcem.2018.6484

4. Hor Yin, Kazutaka Shirai, Wee Teo, “Finite element modelling to predict the flexural behaviour of ultra-high performance concrete members,” Engineering Structures, 183, 741–755, 2019. https://doi.org/10.1016/j.engstruct.2019.01.046

5. Hor Yin, Kazutaka Shirai, Wee Teo, “Numerical model for predicting the structural response of composite UHPC–concrete members considering the bond strength at the interface,” Composite Structures, 215, 185–197, 2019. https://doi.org/10.1016/j.compstruct.2019.02.040

6. Hor Yin, Kazutaka Shirai, Wee Teo, “Numerical simulation of the blast-resistant response of ultrahigh-performance concrete structural members,” Journal of Civil Engineering and Management, 25(6), 587–598, 2019. https://doi.org/10.3846/jcem.2019.10375

7. Kazutaka Shirai, Hor Yin, Wee Teo, “Flexural capacity prediction of composite RC members strengthened with UHPC based on existing design models,” Structures, 23, 44–55, 2020. https://doi.org/10.1016/j.istruc.2019.09.017

• Conference papers

8. Hor Yin, Chhay Teng, Vuthy Sar, “Repair and Strengthening Techniques for RC Structures,” Faculty of Civil Engineering and Architecture, National Polytechnic Institute of Cambodia, 2020.

9. Hor Yin, Kazutaka Shirai, Wee Teo, “Response of UHPC-concrete composite structural members using implicit and explicit finite element method,” In: 2018 The 3rd International Conference on Advanced Functional Materials (ICAFM 2018), San Francisco, United States, August 3 – 5, 2018. (Online: Key Engineering Materials, 793, 93–97, 2019)

10. Wee Teo, Kazutaka Shirai, Hor Yin, “Retrofitting and strengthening interventions of RC members using ultra high performance concrete (UHPC),” In: IABSE Conference – Engineering the Developing World, 726–731, Kuala Lumpur, Malaysia, April 25 – 27, 2018.

11. Hor Yin, Kazutaka Shirai, Wee Teo, “Shear capacity prediction of reinforced concrete members strengthened with ultra-high performance concrete overlay,” In: Proceedings of the Japan Concrete Institute, 40(2), 1243–1248, June 2018.

12. Kazutaka Shirai, Hor Yin, Wee Teo, “Flexural strength calculation of the RC members rehabilitated with UHPC,” In: Proceedings of the Japan Concrete Institute, 40(2), 1237–1242, June 2018.

13. Hor Yin, Kazutaka Shirai, “Investigation of implicit and explicit FEM analysis for RC members strengthened with UHPC under static loading,” Architectural Institute of Japan (AIJ), Technical Paper of Annual Meeting, Japan, September 4 – 6, 2018.

14. Hor Yin, Kazutaka Shirai, Wee Teo, “Model simulation on flexural behavior of ultra-high performance fiber reinforced concrete,” Architectural Institute of Japan (AIJ), Technical Paper of Annual Meeting, Japan, August 31 – September 5, 2017.

15. Hor Yin, Kazutaka Shirai, Wee Teo, “Numerical assessment of ultra-high performance concrete material,” In: 2016 IEEE International Conference on Innovative Engineering Materials (ICIEM 2016), Singapore, August 20 – 22, 2016. (Online open: IOP Conference Series, Materials Science and Engineering, 241, 2017, p. 012004)

16. Hor Yin, Wee Teo, Do Kyun Kim, “Experimental evaluation on UHPFRC-wide beams under bending loads,” In: – Proceedings of the International Conference on Civil, Architectural, Structural and Constructional Engineering, Dong-A University, Busan, South Korea, August 21 – 23, 2015. (Online: Advances in Civil, Architectural, Structural and Constructional Engineering, 237–241, 2016 Taylor & Francis Group)

17. Wee Teo, Hor Yin, “Optimized effective strain model for externally bonded FRP shear strengthened RC members,” In: The 7th International Conference on FRP Composites in Civil Engineering (CICE2014), Vancouver, Canada, August 20 – 22, 2014.

18. Hor Yin, Wee Teo, “Prediction the shear strength for FRP shear strengthened RC beams based on optimized truss models,” Applied Mechanics and Materials, 567, 469–475, 2014.

19. Wee Teo, Hor Yin, Muinuddin Maharun, Saravanan Karuppanan, M Shahir Liew, A Rahman Salleh, T.C Wong, “Research on HGV collisions with concrete bridge piers,” Applied Mechanics and Materials, 567, 648–653, 2014.

20. Hor Yin, Wee Teo, “Parametric assessment for optimized truss models on FRP shear strengthened RC beams,” In: The 2014 IEEE Colloquium on Humanities, Science and Engineering (CHUSER2014), Penang, Malaysia, April 7 – 9, 2014.

21. Hor Yin, Wee Teo, “A study on effective strains in different FRP shear strengthening schemes for analytical optimized truss models,” Advanced Materials Research, 935, 168–171, 2014.

22. Wee Teo, Hor Yin, “Analytical truss models for prediction the shear strength of FRP strengthened reinforced concrete members”, In: The 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS 11), Guimaraes, June 26 – 28, 2013.

23. Wee Teo, H. Mohd Yusuf, B.N.O. Mbuziavo, Hor Yin, “Evaluation of optimised truss models for FRP shear strengthened RC beams,” In: The 18th Congress of IABSE Seoul 2012, South Korea, September 19 – 21, 2012.

24. Wee Teo, N.H. Mohd Yusuf, B.N.O. Mbuziavo, Hor Yin, “Shear strengthening of reinforced concrete beams using shallow-angle CFRP laminate strips,” In: The 11^th International Conference on Concrete Engineering and Technology 2012 (CONCET2012), Putrajaya, Malaysia, June 12 – 13, 2012.

បណ្ឌិត ប៊ិន ម៉ូលីន

• គោត្តនាម-នាម (Name):  បណ្ឌិត ប៊ិន ម៉ូលីន  /   Dr. BIN MOLINNE  
• តួនាទី (Position): Dean, Graduate School, NPIC
• ឯកទេស (Field): Structural Design
• លេខទូរស័ព្ទ (Phone No.): 012-821 662
• អ៊ីម៉ែល (E-mail): molinne@yahoo.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Steel structures
  • Analysis of Suspension Roof Steel Structures
  • Nonlinear Structural Analysis
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):

1. Kmet S., Bin M., “Sposoby analyzy visutych ohybovo tuhych elementov,” In: Zbornik prednasok z XXV. Celostatneho aktivu strategia rozvoja OK. DT Kosice, 1999, 201-207. (Slovak Language)
2. Kmet S., Bin M., “Metody riesenia konstrukcii s visutymi ohybovo tuhymi elementami,” In: Zbornik zo seminara rozvojove tendencies v odbore OK. SvF TU Kosice, 2001, 115-120. (Slovak Language)
3. Kmet S., Bin M., “Experimentalna a teoreticka analyza odozvy nelinearnych visutych ohybovo tuhych elementov,” Inzinierske stavby, 50(2), 2002, 11-17. (Slovak Language)
4. Kmet S., Bin M., “Analyza odozvy visutych ohybovo tuhych elementov,” In: Zbornik zo VII. Vedeckej konferencie Stavebnej fakulty TU, 8. Sekcia: Kovove a drevene konstrukcie. Kosice, 2002, 39-44. (Slovak Language)
5. Kmet S., Bin M., “Analyza visutych ohybovo tuhych elementov,” In: Zbornik 20. Cesko-slovenskej konferencie Ocelove konstrukce a mosty 2003. Editor J. Studnicka, CVUT Praha, 2003, 559-5564. (Slovak Language)

បណ្ឌិត ចេង ហ៊ឈង

• គោត្តនាម-នាម (Name):  បណ្ឌិត ចេង ហ៊ឈង  /   Dr. Cheng Horchhong      
• តួនាទី (Position): Dean, Faculty of Electrical Engineering, NPIC
• ឯកទេស (Field): Semiconductor Device
• លេខទូរស័ព្ទ (Phone No.): 011 25 45 18
• អ៊ីម៉ែល (E-mail): horchhong@gmail.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Sensor Engineering
  • Biomass
  • Solar cell
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  • International peer-reviewed journals

1. Chheuy Bona, Cheng Horchhong and Nemali Santosh Ganesh, “PSO and GSA Based over Current Relay with DG Penetration”, 10, 311-318, 2021.

2. Han-Jung Kim, Young-You Kim, Ki-Won Lee, Horchhong Cheng and Dong-Han Ha, “Porous silicon layer for optical sensing of organic vapor”, 406, 1536-1541, 2011. https://doi.org/10.1016/j.physb.2011.01.064

3. Horchhong Cheng, Young-You Kim and Han-Jung Kim, “Influence of Sodium Chloride on Reflectance Spectrum of Porous Silicon Multilayer”, 60, 364-368, 2010.

4. Han-Jung Kim, Horchhong Cheng, Seon-Hwa Park, Ki-Won Lee and Young-You Kim, “Variations in the Reflectance and in the Photoluminescence Spectrum of an Albumin-adsorbed Porous Silicon Microcavity”,56, 27-32, 2008.

• Conference papers

5. Horchhong Cheng, Han-Jung Kim, Ki-Won Lee, Young-You Kim, “Current-Voltage Characteristic of Porous Silicon Albumin Absorption”, The Korean Physical Society, Gwangju, S. Korea, October 23-24, 2008

6. Seon-Hwa Park, Horchhong Cheng, Seong-Ju Ryu, Han-Jung Kim, Young-You Kim, Jung Hoon Song and Ki-Won Lee, The 14^th International Symposium on the Physics of Semiconductors and Application, Jeju, S. Korea, August 26-29, 2008.

7. Sun-Hye Choi, Horchhong Cheng, Seon-Hwa Park, Han-Jung Kim, Young-You Kim and Ki-Won Lee, The Korean Sensor Society, November 16-17, S. Korea, 2007.

8. Han-Jung Kim, Horchhong Cheng, Ki-won Lee and Young-You Kim, PSM 표면에 안부민을 흡착시킬 때의 발사율 및 PL 측정, 2007년 가을 학술논문발표회 및 임시총회, Jeju, S. Korea, 2007

9. Han-Jung Kim, Horchhong Cheng, Sun-Hye Choi, Ki-Won Lee and Young You Kim, 단층 다공질규소의 표면에 알부민을 흡착시킬 때의 반사율 및 PL 측정, 2007년 가을 학술논문발표회 및 임시총회, Jeju, S. Korea, 2007

បណ្ឌិត ឈុំ អំណត់

• គោត្តនាម-នាម (Name):  បណ្ឌិត ឈុំ អំណត់  /  Dr. CHHOM AMNOTH      
• តួនាទី (Position): Head of Department of Doctoral Studies, Graduate School, NPIC
• ឯកទេស (Field): Civil Engineering
• លេខទូរស័ព្ទ (Phone No.): 085 300 402
• អ៊ីម៉ែល (E-mail): chhom_amnoth@yahoo.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Structural Design
  • Finite Element Modeling
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  1. Chhom A. The influence of the pre-organized cracks in the tensile zone of the reinforced concrete beam under statically short-term loading/ А.Chhom, А.М. Kurobanov, F.K. Sametov// SibADI Bulletin, issue 6 (58), 2017. p.132 – 139. (In Russian)
  2. Chhom A., Mitasov V.M. Deformation of reinforced concrete beams with forming elements under long-term loading. MODERN HIGH TECHNOLOGIES. № 3, 2018. P. 79 – 84. (In Russian)
  3. Chhom A., V. Ledenev. Design Solutions of Unique Buildings and Structures. Questions of Modern Science and Practice V.I. Vernadsky University– 2014. №2(51). p. 60 – 70. (In Russian)
  4. Chhom A. Experimental investigation of deflected mode of the reinforced concrete beams with organized cracks under long-term loading. SibADI Bulletin, issue. 2018; 15(4):p.606-616. (In Russian)
  5. Chhom A. Numerical study of the stress-strain state of reinforced concrete beam with pre-organized cracks under short-term and long-term loading/ A. Chhom // IOP Conf. Series: Materials Science and Engineering 456 (2018) 012067. pp. 1 – 6. (In English)
  6. Chhom A. Reinforced concrete beams with organize cracked under long-term loading/ V.M. Mitasov, A. Chhom// JMEST (Journal of Multidisciplinary Engineering Science and Technology). – 2017. Vol.4 Issue 10. pp. 8494 – 8496. (In English)
  7. Chkhum A. Kurbonov A.M., Danilov M.N., Sametov F.K., Mitasov V.M. Investigation of the stress-strain state of a reinforced concrete beam with an artificial defect in tensile zone under statically short-term loading / A. Chkhum, // Bulletin of KazNiisa JSC. – Almaty. 2017. №. 9 (73), p. 9 – 16. (In Russian)

បណ្ឌិត គង់ រិទ្ធី

• គោត្តនាម-នាម (Name):  បណ្ឌិត គង់ រិទ្ធី  /   Dr. KONG RITHY
• តួនាទី (Position): Head of Department of Master Programs, Graduate School, NPIC
• ឯកទេស (Field): Energy and Mechanical Engineering
• លេខទូរស័ព្ទ (Phone No.): 096 538 2280
• អ៊ីម៉ែល (E-mail): kongrithyitc@gmail.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Energy and Exergy Efficiencies
  • Thermal System and Solar Collectors
  • Thermodynamics
  • Heat Transfer Fluids
  • Waste Heat Recovery
  • Power Plants
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification)៖

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  • International peer-reviewed journals

1. Rithy K., Thoranis D., Attakorn A., and Tanongkiat K., “Performance analysis of biomass boiler-organic Rankine cycle with assisted cascade heat pump for combined heat and power generation including exergy-costing,” Sustainable Energy Technologies and Assessments, Vol. 52, 2022, p. 102125. https://doi.org/10.1016/j.seta.2022.102125
2. Rithy K., Thoranis D., Attakorn A., and Tanongkiat K., “Performance and economic evaluation of a photovoltaic/thermal (PV/T)-cascade heat pump for combined cooling, heat and power in Tropical climate area,” Journal of Energy Storage, Vol. 30, 2020, p. 101507. https://doi.org/10.1016/j.est.2020.101507
3. Rithy K., Thoranis D., Attakorn A., Nat V., and Tanongkiat K., “Thermodynamic performance analysis of a R245fa organic Rankine cycle (ORC) with different kinds of heat sources at evaporator,” Case Studies in Thermal Engineering, Vol. 13, 2019, p. 100385. https://doi.org/10.1016/j.csite.2018.100385
4. Rithy K., Thoranis D., Attakorn A., and Tanongkiat K., “Thermal characteristics of helical coiled heat exchanger with graphene-deionized water on waste heat recovery of combustion stack gas,” Chiang Mai Univ J Nat Sci, Vol. 18, 2019, p. 50-67. https://doi.org/10.12982/CMUJNS.2019.0005
5. Rithy K., Attakorn A., Thoranis D., and Tanongkiat K., “Heat transfer characteristics of deionized water-based graphene nanofluids in helical coiled heat exchanger for waste heat recovery of combustion stack gas,” Heat and Mass Transfer, Springer, Vol. 55, 2019, p. 385-396. https://doi.org/10.1007/s00231-018-2421-4
6. Rithy K., Thoranis D., Attakorn A., and Tanongkiat K., “Heat transfer phenomena on waste heat recovery of combustion stack gas with deionized water in helical coiled heat exchanger,” Case Studies in Thermal Engineering, Vol. 12, 2018, p. 213-222. https://doi.org/10.1016/j.csite.2018.04.010

• Conference papers

7. Rithy K., Attakorn A., Thoranis D., and Tanongkiat K., “Photovoltaic (PV) module sizing of a PV-cascade heat pump for simultaneous hot water heating and building cooling in Tropical climate,” The 14th GMSARN International Conference on Smart Energy, Environment, and Development for Sustainable GMS, 27-29 November 2019, Luang Prabang, Lao PDR.
8. Thoranis D. and Rithy K., “Study on Heat Transfer Behavior of Nanofluid in Helical Coil for Recovering Waste Heat from Stack,” The 18th Conference on Energy, Heat and Mass Transfer in Thermal Equipment and Process, 20-21 March 2019, Krabi Front Bay Resort, Krabi, Thailand.
9. Rithy K., Thoranis D., Attakorn A., and Tanongkiat K., “Performance of nanofluids in helical coils for waste heat recovery of combustion stack gas and economic analysis,” The 17th Conference on Energy, Heat and Mass Transfer in Thermal Equipment and Process, 15-16 February 2018, Lampang Resort, Lampang, Thailand.
10. Rithy K. and Tanongkiat K., “Heat transfer characteristics on waste heat recovery of combustion stack gas with deionized water in helical coiled heat exchanger,” The 10th Thailand Renewable Energy for Community Conference (TREC-10), 29-30 November 2017, Thaksin University, Phatthalung, Thailand.

បណ្ឌិត ឆៃ ប៉េងស្រ៊ន់

• គោត្តនាម-នាម (Name):  បណ្ឌិត ឆៃ ប៉េងស្រ៊ន់  /   Dr. Pengsrorn CHHAI
• តួនាទី (Position): Lecturer, Graduate School, NPIC
• ឯកទេស (Field): Mechanical Engineering
• លេខទូរស័ព្ទ (Phone No.): 017 464 898
• អ៊ីម៉ែល (E-mail): pengsrornchhai@yahoo.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Bio-fluid
  • Biomechanics
  • Biomedical Engineering
  • Computational Fluid Dynamics Analysis (CFD)
  • Fluid Mechanics
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  • International peer-reviewed journals

1. Chhai, P., Lee, J. H., & Rhee, K. (2017). Effects of longitudinal asymmetric distribution of a lipid core on plaque wall stress. Journal of Biomechanical Science and Engineering, 12(1), 16-00588. https://doi.org/10.1299/jbse.16-00588
2. Chhai, P., & Rhee, K. (2018). Effect of distal thickening and stiffening of plaque cap on arterial wall mechanics. Medical & biological engineering & computing, 56(11), 2003-2013. https://doi.org/10.1007/s11517-018-1839-7
3. Park, M. H., Chhai, P., & Rhee, K. (2019). Analysis of flow and wall deformation in a stenotic flexible channel containing a soft core, simulating atherosclerotic arteries. International Journal of Precision Engineering and Manufacturing, 20(6), 1047-1056. https://doi.org/10.1007/s12541-019-00122-z
4. Chhai, P., & Rhee, K. (2020). Computational study on phase lag of arterial-wall motion for assessment of plaque vulnerability. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234(5), 517-526. https://doi.org/10.1177/0954411920905697
5. Kim, J. H., Chhai, P., & Rhee, K. (2021). Development and characterization of viscoelastic polydimethylsiloxane phantoms for simulating arterial wall motion. Medical Engineering & Physics, 91, 12-18. https://doi.org/10.1016/j.medengphy.2021.03.004

• Conference papers

6. Rhee, K., & Chhai, P. Effects of Coronary Plaque Wall Properties on the Wall Stress. Proceedings of the 4^th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT’17), Toronto, Canada – August 21 – 23, 2017
7. Pengsrorn CHHAI*, Jin Hyun LEE* and Kyehan RHEE, “Effects of longitudinal asymmetric distribution of a lipid core on plaque wall stress“. The 17^th Korea Society of Biomechanics, Seoul, August, 2018

បណ្ឌិត ស៊ុន វ៉ាត

• គោត្តនាម-នាម (Name):  បណ្ឌិត ស៊ុន វ៉ាត  /   Dr. SUN VAT
• តួនាទី (Position): Lecturer, Graduate School, NPIC
• ឯកទេស (Field): Energy Engineering
• លេខទូរស័ព្ទ (Phone No.): 081-878 452
• អ៊ីម៉ែល (E-mail): sun_vat@hotmail.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Thermal System and Solar Energy
  • Thermal Energy Storage
  • Energy Efficiency
  • Numerical Calculation
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

• ព្រឹត្តិបត្រស្រាវជ្រាវ (Publication):
  • International peer-reviewed journals

1. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, and Tanongkiat Kiatsiriroat, “Performance analysis on combined heat and power of photovoltaic-thermal module integrated with phase change material-water storage”, Journal of Energy Storage, 47 (2022), 103614. https://doi.org/10.1016/j.est.2021.103614

2. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, and Tanongkiat Kiatsiriroat, “Evaluation of nominal operating cell temperature (NOCT) of glazed photovoltaic thermal module”, Case Studies in Thermal Engineering, 28 (2021), 101361. https://doi.org/10.1016/j.csite.2021.101361

3. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, and Tanongkiat Kiatsiriroat, “A new method for evaluating nominal operating cell temperature (NOCT) of unglazed photovoltaic thermal module”, Energy Reports, 6 (2020), 1029–42. https://doi.org/10.1016/j.egyr.2020.04.026

4. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, and Tanongkiat Kiatsiriroat, “Increase of power generation from solar cell module by controlling its module temperature with phase change material”, Journal of Mechanical Science and Technology, 34.6 (2020), 2609–18. https://doi.org/10.1007/s12206-020-0336-8

5. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, and Tanongkiat Kiatsiriroat, “Study on phase change material and its appropriate thickness for controlling solar cell module temperature”, International Journal of Ambient Energy, 41.1 (2020), 64–73. https://doi.org/10.1080/01430750.2018.1443500

• Thai peer-reviewed journal

6. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, Worrasid Trutassanawin, and Tanongkiat Kiatsiriroat, “Heat transfer behavior of phase change material for controlling solar cell module temperature”, Engineering Journal Chiang Mai University, 25.3 (2018), 167-177. https://www.thaiscience.info/view_content.asp?id=10990864

• Conference papers

7. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, Tanongkiat Kiatsiriroat, “Study of PCM-water storage on PVT module performance for power generation and hot water production”, The 14th GMSARN International Conference on Smart Energy, Environment, and Development for Sustainable GMS, November 27-29, 2019, Luang Prabang, Lao PDR.

8. Vat Sun, Thoranis Deethayat, “Evaluation of normal operating cell temperature of unglazed PVT module for power generation”, The 17th Conference on Energy, Heat and Mass Transfer in Thermal Equipment and Process, February 15-16, 2018, Lampang, Thailand.

9. Attakorn Asanakham, Vat Sun, Tanongkiat Kiatsiriroat “Use of apparent heat capacity model for reducing temperature of solar cell module having cooling with phase change material”, The 17th Conference on Energy, Heat and Mass Transfer in Thermal Equipment and Process, February 15-16, 2018, Lampang, Thailand.

10. Vat Sun, Thoranis Deethayat, Attakorn Asanakham, Tanongkiat Kiatsiriroat, “Numerical and experimental studies on phase change material for reducing PV module temperature”, The 2016 International Conference on Advanced Technology & Sustainable Development, August 21-23, 2016, Ho Chi Minh, Vietnam.

11. Vat Sun, Attakorn Asanakham, Thoranis Deethayat, Tanongkiat Kiatsiriroat, “Use of apparent heat capacity model for reducing temperature of solar cell module having cooling with phase change material”, The 15th Conference on Energy, Heat and Mass Transfer in Thermal Equipment and Process, March 30-31, 2016, Samui, Thailand.

12. Vat Sun, Attakorn Asanakham, and Tanongkiat Kiatsiriroat, “Reduce of solar cell module temperature by phase change material for electricity generation enhancement”, The 8th Thailand Renewable Energy for Community Conference (TREC-8), November 4-6, 2015, Thanyaburi, Thailand.

លោក ចាន់ សុភាព

លោក ព្រំ ពៅ

លោក តេង ឆាយ

• គោត្តនាម-នាម (Name):  តេង ឆាយ  /  TENG CHHAY (M.Eng.)
• តួនាទី (Position): Dean, Faculty of Civil Engineering and Architecture, NPIC
• ឯកទេស (Field): Civil Engineering
• លេខទូរស័ព្ទ (Phone No.): 012-792 894
• អ៊ីម៉ែល (E-mail): tengchhay@yahoo.com
• ជំនាញស្រាវជ្រាវ (Research Area):
  • Steel structures
  • RC Structures
• កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

លោក មិន ឆេងហ៊ាន់

• • គោត្តនាម-នាម (Name):  មិន ឆេងហ៊ាន់  /  MIN CHENGHORN (M. Eng.)
  • តួនាទី (Position): Dean, Faculty of Automotive Engineering, NPIC
  • ឯកទេស (Field): Automotive and Mechanical Engineering
  • លេខទូរស័ព្ទ (Phone No.): 087/012 621 929
  • អ៊ីម៉ែល (E-mail): minchenghorn@npic.edu.kh
  • ជំនាញស្រាវជ្រាវ (Research Area):
    • Internal Combustion Engine (ICE)
    • Engine Testing/Simulation/Design
    • Alternative fuels
  • កម្រិតវប្បធម៌ទូទៅ និងបណ្តុះបណ្តាលវិជ្ជាជីវៈ (Academic Qualification):

  កម្រិតសិក្សា (Degree)	គ្រឹះស្ថានសិក្សា (Institution)	ឆ្នាំបញ្ចប់ (Year of Graduation)
  Master’s Degree	Institute of Technology of Cambodia (ITC)	2019
  Bachelor’s Degree	National Polytechnic Institute of Cambodia (NPIC)	2009
  High School	KHSACH KANDAL HIGH SCHOOL	1988

លោក សារិន សារីវត្ថា

លោក អ៊ុំ សៅកុសល

លោក ស៊ុន សុនិមិត្ត

លោក ស៊ុំ សុចិន្តា

លោក ថាន់ ច័ន្ទចំណាប់

លោក ហ៊ សារ៉ាក់